Camping Cot | KT-C8001

Model No.:

KT-C8001

Color:

Black/Grey

Material:

600D Oxford

Size:

190*68cm

MOQ:

10pcs

A camping cot with a 190 × 68 cm bed surface that holds 120 kg on four support legs, yet weighs 4.9 kg and packs to 47 × 14 × 14 cm. Aluminium alloy frame, 600D Oxford surface, two bed heights. MOQ 10 pcs.

Specifications

ItemDetail
Model No.KT-C8001
Bed surface190 × 68 cm
Height18 cm or 33 cm, two positions
Folded size47 × 14 × 14 cm
Net weight4.9 kg
Load capacity120 kg static
FrameAluminium alloy square tube
Fabric600D high-density Oxford
SupportFour-point legs
ColoursBlack / Grey
MOQ10 pcs

Carton size, gross weight and container loading are quoted per order.

Four steps to set it up

This camping cot is assembled rather than thrown open in one movement, and that is what keeps it at 4.9 kg. Insert the two long poles through the sleeve along each side, clip the four brackets onto the pole, press the fixing buckles down, then push the legs into the corner mounts. Reverse it in the same order and the whole thing collapses into the carry bag.

The advantage over an instant cot is folded size: an instant cot has a fixed frame and folds to roughly twice the length. Four separate legs and two poles let this one go to 47 × 14 × 14 cm, which fits across a car boot rather than along it.

190 × 68 cm of bed surface

The bed surface is what you actually sleep on, and 68 cm width is the number to compare. At 190 cm long it takes an adult lying flat without the head or feet hanging off, and 68 cm leaves room to turn over without touching the frame. Narrower cots at 58–60 cm are sold as camping cots too; they are the size where you end up sleeping on your side all night.

Two heights, 18 cm and 33 cm

The legs mount in two positions. At 33 cm the cot sits at normal bed height and is easier to get on and off, which matters for older users or for anyone with a knee injury. At 18 cm it sits low, which is more stable in wind and gives more headroom inside a low tent. Change the position by re-seating the legs, not by any tool.

Aluminium frame, 120 kg static

The frame is aluminium alloy square tube rather than round tube: a square section resists twisting at the joints, which is where a cot usually starts to sag. Load rating is 120 kg static — a figure for weight resting on the cot, not for someone jumping onto it. Four support legs spread that load along the length instead of at two points.

Fabric

The surface is 600D high-density Oxford cloth, woven tight enough to resist tearing at the pole sleeve and abrasion where boots and gear rub. It is breathable rather than coated airtight, so condensation does not collect under a sleeping bag the way it does on a PVC cot.

Packed and carried

Folded to 47 × 14 × 14 cm at 4.9 kg, the cot goes into a car boot beside luggage rather than on the roof, and one person can carry it in one hand with the bag handle. For buyers shipping in volume, the small folded size is what decides carton count per container.

Care

Wipe the fabric with fresh water and let it dry fully before folding — a cot folded damp is what produces the smell people blame on the fabric. Keep the poles and legs in the bag so they do not rub against the fabric in transit. The frame is aluminium, so it will not rust, but the fittings should still be stored dry.

Also listed as

Catalogues list this model as a camping cot, a camp cot, or folding cots depending on the market, and in retail listings as folding camping cot or foldable camping cot. Buyers comparing portable cot options for a small car often shortlist it for the packed size, and lightweight camping cot listings use it where the 4.9 kg weight matters more than a padded top.

For trade buyers

We supply this camping cot to wholesalers, importers, distributors, outdoor retailers and rental operators. MOQ 10 pcs, colour split set at order, OEM and private-label production available. Carton configuration, container loading and lead time are quoted per order. See the rest of our camping furniture range.

Camping cot 190 cm long and 68 cm wide bed surface
600D high-density Oxford fabric on the camping cot
Four-point support legs and 120 kg static load capacity on the camping cot
Four steps to set up the camping cot: long poles, brackets, buckles and legs
Aluminium alloy square tube frame of the camping cot, 4.9 kg
Camping cot set up inside a tent with two people
Camping cot features: large bed surface, height adjustment, folding and portable storage

Why Partner With KEETU OUTDOOR ?

  • Exporting since 2014 — 12 years of OEM and private-label supply
  • Export markets — Europe, North America, the Middle East, Southeast Asia and Australia
  • B2B customers — importers, distributors and private-label brands
  • MOQ from 10 to 200 pcs per model — lead time around 15-30 days
  • Certified partner factories — CE, ISO9001, BSCI

FAQ

Contact our sales team with your product requirements, quantity, and specifications. We will provide a quotation and guide you through the ordering process.

We provide standard export packaging and customized packaging solutions according to customer requirements.

Our standard payment terms are T/T. Specific terms can be discussed based on order details.

We support flexible delivery terms including EXW, FOB, and other solutions based on customer needs.

Yes. We provide OEM and customized manufacturing services based on samples, drawings, or specific requirements.

Samples are available for in-stock parts. Sample cost and courier fees are covered by the customer.

Yes, every batch undergoes 100% quality inspection before delivery.

We build long-term cooperation through reliable quality, professional service, and continuous support.

Need More Solutions?

Explore our complete range of outdoor products or contact our team for wholesale pricing and customized solutions.

Related Products