Inflatable Seat Cushion | KT-C11001

Model No.:

KT-C11001

Color:

Multiple Colors Available

Material:

70D pongee polyester

Size:

41*30*5cm

MOQ:

200pcs

An inflatable seat cushion that goes up by pressing, not by blowing: 41 × 30 cm of air cells at 5 cm thick, 93 g, packing to a 7 × 11 cm roll that fits in a jacket pocket.

Specifications

ItemDetail
Inflated size41 × 30 × 5 cm
Packed size7 cm diameter × 11 cm
Weight93 g
Seat fabric70D pongee polyester composite TPU
InflationPress valve — no pump, no mouth
ColoursNavy / Black-Grey / Teal / Army Green
MOQ200 pcs

Press to inflate

Open the valve cap, press the body of the cushion a few times, and air goes in through a one-way inlet. Close the cap and it holds. There is no pump to carry and nothing has to be blown into by mouth — the two reasons most inflatable cushions stay in a cupboard instead of going out with you.

The valve is a two-part cap: the inner disc keeps air from escaping while you press, and the outer cover seals it once you are done. That is why an inflatable seat cushion can sit fully inflated for weeks without going soft, and why it deflates in a single press when you want to pack it away.

93 g, packed to a fist

Deflated it rolls into a bag 7 cm across and 11 cm tall. That is why an air cushion gets carried at all: it costs nothing in a daypack, a glovebox or a jacket pocket, and it is there when the seat is a bleacher plank, a rock or a cold bench.

Ninety-three grams is roughly the weight of a phone. It is light enough that the question flips from “is it worth carrying” to “why not”.

The air cells

The surface is moulded into separate cells instead of one open chamber, so air cannot slosh from end to end when you shift and the support stays where you put it. The underside is textured to grip a plastic bleacher seat, and the 70D face is laminated to TPU rather than coated, which is what keeps the air in over repeated packing and unfolding.

Five centimetres of air is a compromise, and a deliberate one: enough to take the edge off a hard seat, thin enough that the cushion still rolls into a pocket. An inflatable cushion that is thicker than this stops being portable, which defeats the point of carrying one.

Where it gets used

Camping. A sit pad on cold ground, or a pillow against a rucksack. At 93 g there is no argument about packing it.

Bleachers. A cushion for stadium seats is normally foam and bulky to carry in. This one deflates between games, and it does not soak up rain on an open bench.

Cars and long trips. It flattens a worn driver’s seat, and it is small enough to take on a flight or a train. It is not a medical cushion and we do not sell it as one.

Colours and care

Four stock colours — Navy, Black-Grey, Teal, Army Green — with custom colours on large orders. Wipe with fresh water, dry it inflated before packing, and store it slightly inflated so the TPU does not take a set along a crease.

For trade buyers

We supply this inflatable seat cushion to importers, distributors, promotional buyers and outdoor retailers. MOQ 200 pcs, OEM and private-label production available, custom colours on larger runs. See the rest of our camping furniture range.

Inflatable seat cushion in navy, black, teal and army green
Inflatable seat cushion 41 × 30 cm inflated, 7 × 11 cm packed and 93 g weight
Four steps to inflate the seat cushion by pressing the valve
Man sitting on the inflatable seat cushion on a mountain summit
Packed inflatable seat cushion held in one hand, about 93 g
inflatable seat cushion before inflation and after inflation

Why Partner With KEETU OUTDOOR ?

  • Exporting since 2014 — 12 years of OEM and private-label supply
  • Export markets — Europe, North America, the Middle East, Southeast Asia and Australia
  • B2B customers — importers, distributors and private-label brands
  • MOQ from 10 to 200 pcs per model — lead time around 15-30 days
  • Certified partner factories — CE, ISO9001, BSCI

FAQ

Contact our sales team with your product requirements, quantity, and specifications. We will provide a quotation and guide you through the ordering process.

We provide standard export packaging and customized packaging solutions according to customer requirements.

Our standard payment terms are T/T. Specific terms can be discussed based on order details.

We support flexible delivery terms including EXW, FOB, and other solutions based on customer needs.

Yes. We provide OEM and customized manufacturing services based on samples, drawings, or specific requirements.

Samples are available for in-stock parts. Sample cost and courier fees are covered by the customer.

Yes, every batch undergoes 100% quality inspection before delivery.

We build long-term cooperation through reliable quality, professional service, and continuous support.

Need More Solutions?

Explore our complete range of outdoor products or contact our team for wholesale pricing and customized solutions.

Related Products