Car Camping Awning | KT-A4001

Model No.:

KT-A4001

Color:

Black/Silver

Material:

210D Oxford Fabric

Size:

3*4.5m

MOQ:

10pcs

A car camping awning in two canopy sizes, 3 × 1.5 m and 3 × 4.5 m, weighing 2 kg. Oxford fabric with a five-layer black coating, 1500 mm waterproof rating, UV50+, iron poles and suction cup mounting — no roof rack needed.

Two sizes, two modes

The canopy comes in 3 × 1.5 m and 3 × 4.5 m. The small size suits a rear-door setup, where the canopy runs back from the tailgate and covers the cooking area. The large size suits a side setup, where 4.5 m runs along the body and covers the doors, the chairs and the table. That is what makes it work as a car side awning and as a rear awning from the same bag — the poles reposition rather than the canopy changing.

Five-layer black coating

The fabric is Oxford cloth built in five layers: a lotus-leaf water-repellent face rated at four levels of water repellency, a reinforced base fabric that resists tearing and wrinkling, a nano colour-retention layer using titanium dioxide, a thickened black coating that blocks UV, and a cured black-coating layer for heat insulation. Together those give a 1500 mm waterproof rating and UV50+. The double black coating is the part that matters in summer: a single-layer canopy blocks light but still transmits heat, which is why the space under it feels warm.

No roof rack needed

Strong suction cup hooks attach the canopy to the bodywork, so this vehicle awning needs no crossbars, no drilling and no rails. That is what makes it a portable awning you can use on a hire car, a van with a bare roof or a friend’s SUV. The hooks are supplied with the canopy, and they release without leaving a mark.

Iron poles and guy lines

The two poles are iron, thicker than the aluminium poles usually bundled at this price, with a metal hanging point at the top rather than a plastic cap. Guy lines run through adjustable windproof buckles, and the pegs glow in the dark so nobody walks into a line at night. For camping awning use on open ground, peg the windward side first, then tension the poles against it.

Room for one to five

The large canopy covers a group of one to five with chairs and a table underneath, and it packs to 2 kg, which is light enough to carry to a beach or a riverbank rather than using it only beside the car. As an overland awning it also works rigged flat as a sun sail when there are trees to tie off, and pitched low over a groundsheet it doubles as a tent awning.

What is in the bag

  • Canopy, 3 × 1.5 m or 3 × 4.5 m, black-coated
  • Thickened canopy poles
  • Strong suction cup hooks
  • Thickened windproof guy ropes
  • Glow-in-the-dark pegs
  • Windproof buckles
  • Canopy mallet
  • Storage bag

Specifications

ItemDetail
Model No.KT-A4001
Canopy sizes3 × 1.5 m / 3 × 4.5 m
FabricOxford cloth, five layers
Waterproof rating1500 mm
UV ratingUV50+
Pole materialIron
Product weight2 kg
Capacity1–5 people
AssemblyRequires setup
MountingSuction cup hooks, no roof rack

Packing and OEM

The kit packs into the storage bag with the poles, pegs, ropes and hooks in separate compartments. Neutral packing and private label are available, with custom colour and logo printing quoted per order. It sits alongside the rest of our car awning range. Reference: awning construction.

Prices and configurations are quoted per order.

Portable vehicle-side awning with suction cup hooks, guy ropes, glow-in-the-dark pegs, canopy poles, and storage bag
Black-coated vehicle-side awning providing sun and rain protection beside a car at a mountain lake
car camping awning material
230 cm car awning pole with 19 mm diameter, reinforced construction, tear-resistant hanging point, and adjustable guyline buckle
Six car camping awning benefits: sun protection, wind protection, selected materials, stable structure, quick setup, and spacious shelter
car camping awning
car side awning
vehicle awning carry bag with suction cups, mallet, guy ropes, and tent stakes

Why Partner With KEETU OUTDOOR ?

  • Exporting since 2014 — 12 years of OEM and private-label supply
  • Export markets — Europe, North America, the Middle East, Southeast Asia and Australia
  • B2B customers — importers, distributors and private-label brands
  • MOQ from 10 pcs per model — typical lead time around 30 days
  • Certified partner factories — audit documentation available on request

FAQ

Contact our sales team with your product requirements, quantity, and specifications. We will provide a quotation and guide you through the ordering process.

We provide standard export packaging and customized packaging solutions according to customer requirements.

Our standard payment terms are T/T. Specific terms can be discussed based on order details.

We support flexible delivery terms including EXW, FOB, and other solutions based on customer needs.

Yes. We provide OEM and customized manufacturing services based on samples, drawings, or specific requirements.

Samples are available for in-stock parts. Sample cost and courier fees are covered by the customer.

Yes, every batch undergoes 100% quality inspection before delivery.

We build long-term cooperation through reliable quality, professional service, and continuous support.

Need More Solutions?

Explore our complete range of outdoor products or contact our team for wholesale pricing and customized solutions.

Related Products