Universal Roof Rack Cross Bars | KT-A2003

Model No.:

KT-A2003

Color:

Silver

Material:

Aluminium alloy

Size:

Length quoted per vehicle

MOQ:

10sets

Universal roof rack cross bars for cars without roof rails. Two fixing kits included — door frame hooks for cars with no mounting points, and reserved-hole fittings for cars that have factory points. Aircraft aluminium, 150 kg load, lockable feet, 4 cm adjustment each side.

Fits cars without roof rails

Most cross bars assume your car already has roof rails. This set is for the other case, and two fixing kits come in the box. Which one you use depends on the car, not on the bars.

The door frame hooks clamp over the frame edge and tighten with the hex wrench — for cars with no rails and no factory points. The reserved-hole fittings bolt into the mounting points many cars hide under the door frame trim, near the front and rear of the roof. If a car has neither, drilling may be needed; the installation sheet covers it.

Each side adjusts 4 cm in width, so the same set covers a range of roof widths rather than being tied to one model.

Common cars without roof rails

The cars below are typical candidates, because most versions left the factory without roof rails. Trim level matters: a higher trim of the same model may have rails, in which case this set is not the right one.

CarUsual mounting
Ford FocusDoor frame hook
Honda CivicDoor frame hook
Audi A4Door frame hook
Volkswagen GolfDoor frame hook
BMW 3 SeriesDoor frame hook
Mercedes C-ClassDoor frame hook
Toyota CorollaDoor frame hook

Some cars in this group do have threaded points under the trim, in which case the reserved-hole fittings give a more permanent fit than the hook. Send us the model, year and trim before ordering and we will confirm which method applies.

What it carries

With 150 kg across the pair, these universal roof rack cross bars take a roof box, two bikes on fork-mount carriers, a kayak on J-bars, or a set of snowboards. The load rating is per pair, not per bar, so the figure to compare against other roof rack cross bars is the set figure. Two bars spread the weight across four feet, which is what keeps the roof panel from flexing under a heavy box.

Quiet at speed

The bar is aircraft-grade aluminium alloy, 8.5 cm wide, 6.5 cm tall and 2.5 cm thick, anodised so the surface does not oxidise or fade, with a drainage channel running down the middle of the top face. The shape is what keeps these quiet: at motorway speed the whistle that flat-profile bars produce is largely gone, which matters on a car used for long trips rather than the occasional load.

Locking feet and paint protection

Each foot carries a lock core with two keys supplied, so the bars cannot be lifted off without the key. The nylon feet are one-piece mouldings baked for over 40 hours, which is what keeps them from deforming in heat or cold. Soft rubber pads sit against the roof at every contact point, so the bars clamp without marking the paint.

Specifications

ItemDetail
Model No.KT-A2003
MaterialAircraft-grade aluminium alloy + reinforced nylon feet
FinishAnodised aluminium, drainage channel on top
Bar dimensionsWidth 8.5 cm / Height 6.5 cm / Thickness 2.5 cm
Bar lengthMatched to the vehicle — quoted per model
Width adjustment4 cm each side
Load capacity150 kg
Set contents2 cross bars
Fixing kitsDoor frame hooks + reserved-hole fittings
Included2 keys, hex wrench, rubber pads, installation sheet
ColourSilver
MOQ10 sets

Also listed as

Depending on the market these universal roof rack cross bars are sold as cross bars roof rack, roof rack and crossbars, or cross bars for cars without roof rails. All describe the same two-bar aluminium set with two fixing kits.

For trade buyers

We supply these cross bars to wholesalers, importers, distributors and private-label brands. Bulk orders and container loading are quoted per order. See the rest of our roof rack range.

Prices and configurations are quoted per order.

Universal roof rack cross bars, set of two
Universal roof rack cross bars with all fixing parts
Quiet roof rack crossbars on a sedan roof
Cross bars hooked over the door frame of a white sedan
Door frame hook mounting for cars without roof rails
Mounting cross bars on factory fixed points
Door frame hook mounting for cars without roof rails
Cross bar dimensions: 8.5 cm wide, 6.5 cm high, 2.5 cm thick
Lockable cross bar foot with keys
Cross bars packed in a five-layer corrugated carton

Why Partner With KEETU OUTDOOR ?

  • Exporting since 2014 — 12 years of OEM and private-label supply
  • Export markets — Europe, North America, the Middle East, Southeast Asia and Australia
  • B2B customers — importers, distributors and private-label brands
  • MOQ from 10 to 200 pcs per model — lead time around 15-30 days
  • Certified partner factories — CE, ISO9001, BSCI

FAQ

Contact our sales team with your product requirements, quantity, and specifications. We will provide a quotation and guide you through the ordering process.

We provide standard export packaging and customized packaging solutions according to customer requirements.

Our standard payment terms are T/T. Specific terms can be discussed based on order details.

We support flexible delivery terms including EXW, FOB, and other solutions based on customer needs.

Yes. We provide OEM and customized manufacturing services based on samples, drawings, or specific requirements.

Samples are available for in-stock parts. Sample cost and courier fees are covered by the customer.

Yes, every batch undergoes 100% quality inspection before delivery.

We build long-term cooperation through reliable quality, professional service, and continuous support.

Need More Solutions?

Explore our complete range of outdoor products or contact our team for wholesale pricing and customized solutions.

Related Products